Amazon.com: Milcasa Magic 2 – Wall Mount Concealed Sliding System for Wood Doors - Completely Concealed Hardware and Track (180

  Size:1800 ( Max door width 71")

  MAGIC 2 :

  Barn Door Sliding System with Invisible running upper track recessed into the door.

  · Max. Door Weight: 176 lbs (80 Kg)

  · Minimum Door Thickness: 1-3/8 Inch

  · Minimum Door Width: 26-11/16 Inch

  · Maximum Door Width: 71" Inch

  · Upper Track Finish: Brushed Anodized Graphite Area

  · Application For Residential, Hotels, Commercial For 1-leaf sliding doors for hard floors (laminate, PVC, tiles) and (soft floors, carpet, cork – only for use in combination with bottom/floor track)

  · Adjustment facility: Distance door to wall +4 mm (adjustment on both sides, for compensating uneven walls), height ±2 mm Installation: Wall mounting floor must be even and level +/- max 1/4"

  This unique concealed hardware and running track create the illusion that the door is floating.

  This hardware can be cut and fitted for a wide variety of door widths and thicknesses. It is a high-quality smooth running system.

  Completely concealed hardware and upper running track Sliding system for wood door or aluminum door panels and frames Interior / Residential and Hotels Doors Right and left doors applicable Smooth sliding system. The slide system is built into the door, making it completely invisible whether the door is a closed or open position. The mounting plate is designed to be wall-mounted.

  ★Features: Magic 2 is an INNOVATIVE and PATENTED, made in Italy system that represents the evolution of Magic. Over 50 mm of the braking distance Uses new PATENTED dampers, for total braking of 50 mm, increasing the soft closing motion of 20 mm more than the previous version, keeping the same widths of the door. New adjustable stoppers The new adjustable dampers are no more connected to the spacer or end caps. is now possible to adjust the damper position when required.

 

Hunter Jones

Hunter Jones

Next Post

Leave a Reply

Your email address will not be published. Required fields are marked *